Semiconductor Switching Matrix MX-8X2/2+2X8/8-6G

The MX-8×2/2+2×8/8-6G is an RF matrix consisting of three matrices with dividers and semiconductor switches. The principle is as described in the block diagram. It can be used for various applications, e.g: – Switching unit for RF generators, amplifiers and antennas in EMC test laboratories – Selection unit for filters, diplexers, attenuators, etc. – Any automated routing of the measurement

further information ...

Description

The MX-8×2/2+2×8/8-6G is an RF matrix consisting of three internal matrices with dividers and semiconductor switches. It can be used for several applications, e.g:

Switching unit for RF generators, amplifiers and antennas in EMC test laboratories
Selection unit for filter, diplexer attenuator, etc.
Any automatic forwarding of the measurement

With the MX-8×2/2+2×8/8-6G, all outputs can be connected to a maximum of one input at the same time. This can be the same input for up to eight outputs. The configuration consists of 16 inputs and 16 outputs. The usability can be extended in combination with attenuators, splitters and other modules.

The frequency range of the switch matrix is between 500 MHz and 6000 MHz, making it ideal for LTE and 5G test applications.

By replacing the cumbersome patch panels, test labs can be automated. This control is then carried out very simply via RS-232, LAN or web control functions (on request).

(Image may differ from the original.)